Amplitube 4 by IK Multimedia

The features of IK Multimedia Amplitube 4: The functionality and interface are different in as a plug into the standalone edition. The looper and mini Daw are absent but apart from the rest of it are the same. It has both the tuner from the earlier edition and a new Ultra Tuner. There are two stomp insert chains, and each one accommodates up to 8 effects.
amplitube 4 full

IK Multimedia AmpliTube 4 Deluxe

There are three versions of AmpliTube 4 discussed in this review: The difference between the versions is the range of gear included. AmpliTube 4 is the entry level version.

The Deluxe version more than doubles the gear you get. The course uses AmpliTube 4 throughout and is a great way to find out how you can use the software to tweak and setup your own tones and effects combinations. When you consider that the price for the iRig HD 2 is lower than the regular price of AmpliTube 4, it makes sense to buy an iRig if you want AmpliTube.

Included gear in AmpliTube 4: Cab Room: Ease of use As with any piece of software that is packed with different features, it can feel overwhelming at first. It can be hard to figure out where to start with AmpliTube 4, just like when you load up a DAW for the very first time. Here is the main screen with some of the main sections highlighted: In the green highlighted area above, you can see the overall signal chain.

Each section eg: Tuner, Stomp A, Amp A, etc. Things get interesting when you realize you can change the overall routing. The numbered squares on the left allow you to switch instantly between eight different routing options. Here are a couple of examples: This allows you to create a nice long pedalboard into one amp before getting split into two cabinets. It basically allows you to mix two completely separate rigs together. You can run two different amps, cabs and effects units in any way you want.

This gives you a lot of flexibility for creativity or can help you achieve a very thick tone. It allows us to select a stereo input if we wanted. This would be handy for acoustic guitarists recording from two different microphones or a mic and pickup combination. The third example highlighted 7 is an example of a different way you can run two independent amps, cabinets and stompboxes, but keep a mono signal.

This is great if you want to mix two different amps together but want to avoid any stereo separation. I feel this is a very strong feature in AmpliTube because it gives you so much flexibility. You can set up and instantly switch between different rigs and find the perfect setting for you. Running two amps together or switching between stompboxes in parallel or series is difficult to do in real life. In AmpliTube, you can easily switch and experiment with different rigs. Gear area: All the gear are displayed to look like actual physical gear.

Just adjust the knobs on the amp or pedal just like you would in real life. You will notice that some pedals have the proper name and branding eg: Other pedals look like well known pedals but with a slightly changed name eg: It depends on whether AmpliTube has an agreement with the company the gear is modeled on or not.

Setting up a pedalboard is a matter of selecting the pedals you want and dragging them into position. If you want to switch two pedals, simply drag and drop to change the order.

This is a great way to learn how pedal position affects your tone. It looks like a pedalboard and works just like you would expect a real pedalboard to work. If you have a MIDI footcontroller you can control any aspect of the pedals. Some pedals also include different presets and you can save presets and even your entire pedalboard. Very handy once you come up with a pedalboard you like.

Amps blue highlighted area The amp section is just as easy to use as the pedalboard because it looks like a real amp. Being able to use gear like the above amp is one of the big advantages software like AmpliTube give guitarists. You can save presets with your amp just like in the pedalboard area. So once you dial in a great tone with a specific amp model, you can save the settings to use in other presets. The Cab Room essentially gives you access to all the gear and flexibility available in a real recording studio.

This is where you set up your mics, cabinets, speaker selection and even the type of room. In the below screenshot, you can see that AmpliTube has automatically selected a cabinet that suits the amp I selected earlier: But you can easily switch in and out different cabinets.

The above screenshot shows six different cabinets that are suitable for the selected amp. Those cabs will suit, but you can definitely choose any available cabinet from the drop down menu. You can choose any cabinet from the range and connect it to any amp. I spent quite some time experimenting with mixing modern and vintage gear together to some interesting results.

You have a lot of flexibility when it comes to microphones. Want to reposition the mic? Just drag it to the position you want on the cabinet. Want to mix between a dynamic and condenser mic? Just position them and adjust the mix. It really is easy to use because of the 3D rendering of the gear. Just by looking at the screenshot below you know exactly how the mics are positioned: Speaker selection is another interesting area. You can swap in and out different speakers in the same cabinet. For most guitarists this is probably a bit too extreme, but I know there will be some gearheads out there who want to go into that detail.

As you can see below, you can switch between six different types of rooms: Picking the ideal room for the type of tone you want is so crucial. You can also set up room mics and mix between them and any other mics you set up. Overall, the cab room gives you plenty of control over your tone while keeping it easy to use. It also allows you to set up an effects loop for stompboxes.

The rack effects are pretty simple to use as shown below: It first appears as a rack unit. Preset Selection yellow highlighted area As with any software like this, AmpliTube 4 comes with a preset library. It includes a range of presets and you can use it to save your own. You can sort the different presets or search for specific ones. When you select a preset, you are shown a diagram of the entire rig.

For example you may be missing the amp used or simply one of the pedals. This is usually fine, but every time you select a preset when you have missing gear, you get an annoying warning message. This warning will show up every single time.

The looper gives you up to four loops which is more than enough for most situations. You can export the loops or the entire loop mix if you want which is a quick and easy way to save any ideas you come up with. Basically, AmpliTube 4 is the shell. You get some gear with it, but a lot of the gear is available for individual purchase or in bundles. So you can either upgrade to Deluxe or MAX which includes everything , or you can buy individual gear from the Custom Shop: The good thing about the Custom Shop is you can trial any piece of gear for free before you decide to buy it.

In some ways having to buy extra gear is a bit disappointing. It would be nice if AmpliTube 4 came with everything like it did in the past. You only pay for what you want. Each version has seen massive increases in quality and features. The jump from AmpliTube 2 to AmpliTube 3 was so significant in terms of quality.

Modelling software started to feel real enough that you could come up with excellent quality recordings all using software. The jump from AmpliTube 3 to AmpliTube 4 may not be as big a jump, but you can definitely hear an improvement. I feel that for most guitarists, AmpliTube 4 can produce tone superior than what you would get by recording your actual amp at home. Any guitarist can now produce incredibly high quality recordings without having to shell out thousands at a local studio.

The only shortcoming I want to point out is some of the pedals you get in the standard version. Many of the effect pedals feel quite generic and a bit bland. But in the standard version, you unfortunately miss out on most of them. The sound quality of AmpliTube 4 is spot on. From a features point of view, the software is really easy to use. You have plenty of flexibility to set up a rig and pedalboard exactly how you want without restriction.

Shop by category

It gives you all the hyperrealistic tone and flexibility of AmpliTube 4 plus a ton of extra gear not found in the standard version for a grand total of pieces of gear that includes amplifiers, cabinets, stompboxes, speakers, microphones, rack effects and more. And you get all this in addition to revolutionary features like AmpliTube 4’s hyperrealistic cab room, dual 3D mic positioning, individual speaker selection, 8-track recorder, looper and UltraTuner. Want the full treatment? Get AmpliTube 4 Deluxe. Included Gear AmpliTube 4 Deluxe includes all the gear models available inside AmpliTube 4 plus an additional pieces of gear for a total of over models. You get: UltraTuner plus a fully chromatic rack tuner AmpliTube 4 Deluxe includes 5 new classic amplifier models that represent some of the best British tones from the 70s, 80s and 90s plus an “Acoustic Sim” model pedal, a double mic setup and UltraTuner, the most precise digital tuner available.

VIDEO: west.u6831319.isp.regruhosting.ru | IK Multimedia AmpliTube 4 Deluxe

Buy IK Multimedia AmpliTube 4 Deluxe – Guitar Amplifier and Cabinet Emulation DAW with full recording, looping, editing, mixing, and exporting capabilities. All in all, AmpliTube 4 is stacked full of improvements, and upgrading from previous versions is a no-brainer. And for those who are new to IK’s modelling. AmpliTube 4 contains all new gear; if you have AmpliTube 3 (or earlier), you can use AmpliTube 4 to IK Multimedia Amplitube 4 (Full Version, Download).

Leave a Reply

Your email address will not be published. Required fields are marked *